Ethernet to 4 Optically Isolated Inputs / 4 Reed Relay Digital Interface Adapter, with PoE (802.3af)

Part: 110PoE   Model: eI/O DIO-8

$204.00

Need some help? Contact us

Description

Control and monitor four optically isolated inputs and four Reed relay outputs via any 10/100BaseT Ethernet connection with the eI/O-110PoE digital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground, while the Reed relays provide long-life switch closures well suited to low-current devices. Each Reed relay has a discrete common and each pair of inputs share a common for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-110PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-110PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

Communicate with eI/O Ethernet digital I/O modules using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development. The Sealevel Mod+ Connect app is an easy-to-use diagnostic utility that allows you to monitor, test and troubleshoot Sealevel eI/O and SeaI/O modules using your iPhone or iPod touch.

Category:

Additional information

Family

eI/O

Input Range

5-30 VDC

RoHS Compliant

Yes

Power Requirement

802.3af PoE Class 0 @ 2.2W (Typical)

# of Ports

4/4

PoE Powered

Yes

Output Type

SPST Form A Reed relays

Operating Temperature

0°C to 70°C (32°F to 158°F)

Host Interface(s)

Ethernet

Input Impedance

6.2 K Ohms (in series)

Input Isolation

2500 VAC RMS, 3500 VDC

Contact Bounce Time

0.5ms max.

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Field Wiring

16 – 30 AWG

Dimensions

4.5 (L) x 3.5 (W) x 1.3 (H)

Digital I/O

Isolated Inputs, Reed Relay Outputs

Contact Voltage

60VDC/42VAC

Contact Release Time

0.2ms max.

Contact Operate Time

0.5ms max.

Contact Current

500mA max.

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • 10/100BaseT Ethernet Modbus TCP interface
  • 4 optically isolated inputs provide protection against surges and ground loops
  • 4 SPST Form A Reed relays are well suited to low current devices
  • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
  • Optional removable spring-clamp terminal blocks available for I/O connections
  • PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
  • Status LEDs display power, Ethernet link and I/O activity
  • Sealevel SeaMAX software supports Microsoft Windows operating systems
  • Housed in rugged, attractive plastic enclosure
  • Includes 7′ CAT5 Ethernet cable (Item# CA246)

Windows Software

Software: SeaMAX - Windows

Reviews

There are no reviews yet.

Be the first to review “eI/O DIO-8”

Your email address will not be published. Required fields are marked *