2106 USB to 1-Port RS-422 DB9 Serial Interface Adapter
2106 USB to 1-Port RS-422 DB9 Serial Interface Adapter

Part# 2106

(SeaLINK+422)

USB to 1-Port RS-422 DB9 Serial Interface Adapter



OR

Don't see what you need? Ask about a custom product.

Where to Buy | Email Sales |
Or call us at: 864.843.4343
The 2106 USB serial adapter provides a single RS-422 serial port that simplifies adding USB connectivity to legacy non-USB RS-422 applications via a standard DB9M connector. The adapter incorporates rugged, molded connectors that improve reliability in automation, factory floor, industrial and mobile applications.

The USB serial adapter features programmable baud rate and data formats with 128-byte transmit and 384-byte receive buffers. The adapter is powered by the USB port, is compatible with all standard PC baud rates and supports high-speed communication to 921.6 Kbps.

Sealevel's SeaCOM software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. After installing the software, simply connect the SeaLINK® serial interface adapter to your USB port and the device is immediately recognized by the system as a standard COM port.

The attached cable is approximately 60 inches long and fully shielded to protect the 2106 from RF and EMI interference that is common in mobile and industrial environments. The 2106 operates over a wide 0 to +70C and is available in an extended temperature version.

Do you know that adapter design can impact your application? Find out how in this USB Serial performance report.
Host Interface USB
# of Ports 1
Brand/Family SeaLINK
Electrical Interface RS-422
USB Powered Yes
RoHS Compliant Yes
Serial Connector(s) DB9M
Communications Chip USB/UART
Max Data Rate 921.6K bps
Max Data Distance 4000 feet
Power Requirement +5V @ 70mA
USB Specification 1.1 Compliant
2.0 Compatible
Operating Temperature 0 - +70C
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions Overmold: 2.675" (L) x 1.02" (W) x 0.6" (H)
Overall Length: 60"
  • • Compliant with RoHS and WEEE directives
  • • High speed UART with 128-byte Tx FIFO and 384-byte Rx FIFO
  • • Data rates to 921.6K bps
  • • Rugged construction using molded connectors
  • • Powered by USB connection
  • • Sealevel software supports Windows 98SE/ME/2000/XP/Vista and Linux operating systems
  • • Total length 60"
  • • DB-9M connector






Isolated 7-Port USB Hub
Part#HUB7i
Isolated 7-Port USB Hub

$199.00

Terminal Block Kit
Part#KT105
Terminal Block Kit

$28.95

Terminal Block
Part#TB05
Terminal Block

$19.95

DB9F to Opto 22 DB9F
Part#DB103
DB9F to Opto 22 DB9F

$9.95

Terminal Block
Part#TB34
Terminal Block

$8.95

DB9 207M SMPTE Cable
Part#CA190
DB9 207M SMPTE Cable

$19.95

       
Proudly Made in the USA
© Copyright 1996 - 2016, Sealevel Systems, Inc. All rights reserved.