USB to 4-Port RS-232, RS-485 RJ45 VersaCom Serial Interface Adapter, Bus-Powered

Part: 2407   Model: SeaLINK+4.VC

RJ45 Power Options

$321.00

Need some help? Contact us

Description

The SeaLINK® 2407 4-port USB to serial adapter offers an easy way to connect multiple RS-232 or RS-485 devices via a single USB port. With the unique VersaCom multi-interface connector design included on the 2407, both RS-232 and two-wire RS-485 signals are always present and active on the RJ45 serial connectors. Simply select the appropriate pin out for RS-232 or two-wire RS-485 on each individual port. There is never a need to open the enclosure to set internal jumpers or switches, so field installation and service is easy. Status LEDs display transmit and receive data activity.

Sealevel’s SeaCOM USB software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. After installing the software, the serial ports appear as standard COM ports to the host system enabling compatibility with legacy software. The 2407 uses a state machine architecture that greatly reduces the host computer’s overhead when communicating over multiple ports simultaneously. Data rates up to 921.6K bps are supported.

The 2407 is USB bus-powered, so no external power supply is required. For conveniently powering serial peripherals, ordering options allow an external power source to be connected to a DC jack on the rear of the unit. The supplied power is fused and connected to pin 5 on each of the four RJ45 connectors. Select the appropriate configuration option for your application. Optional power supplies are available under the Accessories tab.

To further simplify connecting to VersaCom RJ45 connectors, Sealevel offers a number of accessories including RJ45 modular adapters. With these helpful adapters you can easily connect to serial ports on virtually any computer, PLC, or peripheral regardless of the device’s serial connector type or gender. For more information please browse our full line of adapters and converters.

Do you know that adapter design can impact your application? Find out how in this USB Serial performance report.

Category:

Additional information

Operating Temperature

0°C to 70°C (32°F to 158°F)

USB Specification

1.1 Compliant, 2.0 Compatible

USB Powered

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

Serial Connector(s)

RJ45, VersaCom

RoHS Compliant

Yes

Power Requirement

+5V @ 300mA

Family

SeaLINK

Max Data Rate

921.6K bps

Communications Chip

USB/UART

Max Data Distance

50 feet (RS-232)4000 feet (RS-485)

Host Interface(s)

USB

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

High Retention USB

Yes

Electrical Interface

RS-232

Dimensions

9.2 (L) x 5.3 (W) x 1.7 (H)

# of Ports

4

  • Compliant with RoHS and WEEE directives
  • Utilizes high-speed UARTs with 128-byte Tx FIFOs and 384-byte Rx FIFOs
  • Housed in rugged, attractive plastic enclosure
  • Powered by USB connection
  • Optionally configured to power 5, 12 or 24 VDC serial peripherals
  • Optional external power is internally fused and connected to pin 5 on each RJ45 connector
  • Provides 4 RJ45 serial ports with Tx/Rx status LEDs
  • VersaCom design allows RS-232 or two-wire RS-485 selection via cabling on each individual port
  • High-retention USB type B connector prevents accidental disconnection of USB cable
  • Integrates transmit and receive LED indicators on each port
  • Sealevel SeaCOM software supports Windows and Linux operating systems
  • Includes 72-inch USB cable (Item# CA179)

Windows Software

Software: SeaCOM - Windows

Linux Software

Software: SeaCOM - Linux

Datasheet

Datasheet: 2407

Manual

Manual: 2407

Reviews

There are no reviews yet.

Be the first to review “SeaLINK+4.VC”

Your email address will not be published. Required fields are marked *