My Cart
The 3189-TB2 kit includes two TB34 terminal blocks that simplify RS-422 and RS-485 field wiring. Each terminal block adapter includes a DB9 female connector and five screw terminals.
The 3189 ISA isolated serial interface provides the PC with two Isolated RS-422, RS-485 Asynchronous links to data collection and other devices. Isolation is important in installations where the equipment connected to the PC is either located far from the host system, or on a different power transformer circuit. The optical isolation feature of the 3189 eliminates the risk of Ground Loop Current, a commonly neglected and misunderstood phenomenon which leads to data errors and the destruction of communications equipment.
For user's that require custom baud rates, isochronous communications, or 9-bit protocol, the 3189 ISA isolated serial interface is available with the Oxford 16C950 UART, part number 3189-SN.
The 3189 ISA isolated serial interface provides the PC with two Isolated RS-422, RS-485 Asynchronous links to data collection and other devices. Isolation is important in installations where the equipment connected to the PC is either located far from the host system, or on a different power transformer circuit. The optical isolation feature of the 3189 eliminates the risk of Ground Loop Current, a commonly neglected and misunderstood phenomenon which leads to data errors and the destruction of communications equipment.
For user's that require custom baud rates, isochronous communications, or 9-bit protocol, the 3189 ISA isolated serial interface is available with the Oxford 16C950 UART, part number 3189-SN.
| Host Interface | ISA |
|---|---|
| # of Ports | 2 |
| Electrical Interface | RS-422, RS-485 |
| UART | 550 UART |
| Serial Connector(s) | DB9M |
| Communications Chip | 16550 |
| Max Data Rate | 115.2K bps |
| Max Data Distance | 4000 feet |
| RS-485 Operation | Full Duplex (4 wire), Half Duplex (2 wire) |
| Operating Temperature | 0 - +70C |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
- • True port to port isolation
- • Automatic control of RS-485 driver enable
- • Selectable COM: port address
- • Selectable and sharable IRQ (2-7,10-12,14 and 15)
- • Compatible with existing communication drivers
- • 16-bit addressing eliminates I/O conflicts
- • Kit includes two TB34 terminal block adapters
 Part#3189 Ultra-SIO-ISO
$289.00
|
 Part#RJ9S8 Modular Adapter
$3.95
|
 Part#DB103 DB9F to Opto 22 DB9F
$9.95
|
 Part#KT105 Terminal Block Kit
$28.95
|
 Part#KT106 Terminal Block Kit
$43.95
|
 Part#TB05 Terminal Block
$19.95
|
 Part#TB06 Terminal Block
$24.95
|
 Part#CA176 RS-422 to RS-530 Cable
$9.95
|
 Part#CA127 DB9 Serial Extension Cable
$9.95
|