My Cart
The 3612 serial interface card provides a single PCMCIA synchronous serial link to devices that require mobile communications. Simply install the SeaMAC V4 driver, plug the PC-ACB-MP card into a PCMCIA slot, and the card is automatically recognized by the system.
The Sealevel SeaMAC driver provides support for HDLC and SDLC. Certain configurations of Bi-Sync, Monosync, and RAW protocols are supported. Please call to discuss your specific requirements.
The Sealevel SeaMAC driver provides support for HDLC and SDLC. Certain configurations of Bi-Sync, Monosync, and RAW protocols are supported. Please call to discuss your specific requirements.
| Host Interface | PCMCIA |
|---|---|
| # of Ports | 1 |
| Electrical Interface | RS-232, RS-422, RS-485, RS-530, RS-530A |
| V.35 | Yes |
| RoHS | Yes |
| Communications Controller | Z85230 |
| Serial Connector(s) | DB25M |
| Communications Chip | 85233 ESCC |
| Max Data Rate | 64K bps (burst) |
| Max Data Distance | 50 feet (RS-232) 4000 feet (RS-485) |
| RS-485 Operation | Full Duplex (4 wire) Half Duplex (2 wire) |
| Operating Temperature | 0 - +70C |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
- • Compliant with RoHS and WEEE directives
- • Type II, 16-bit PCMCIA 2.01 (JEIDA 4.1) compliant form factor
- • Configurable for RS-232, RS-422, RS-485, RS-530, RS-530A, or V.35
- • Z85233 Enhanced Mono Serial Communications Controller (EMSCC)
- • Software programmable baud rate
- • Hot-swappable
- • 12" detachable cable terminates to DB-25M connector (Item# CA164)
 Part#BK-SR2 PCMCIA Strain Relief
$49.95
|
 Part#CA104 DB25 Serial Cable
$7.95
|
 Part#CA107 RS-530 to RS-449 Cable
$24.95
|
 Part#CA178 DB25 to V.35 Cable
$39.95
|
 Part#CA159 RS-530 to X.21 Cable
$19.95
|
 Part#KT104 Terminal Block Kit
$36.95
|
 Part#TB04-KT Terminal Block
$29.95
|