RS-232 Modbus RTU Interface to 16 Isolated Inputs / 8 Form C Relay Outputs

Part: 420S-OEM   Model: SeaI/O-420S-OEM

$240.00

Need some help? Contact us

Description

Control and monitor 16 optically isolated inputs and 8 Form C (SPDT) relay outputs with the SeaI/O-420S-OEM. Inputs can range from 5-30VDC, while the Reed relays provide long life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-420S-OEM is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-420S-OEM using industry-standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O OEM boards are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

Family

SeaI/O

Input Isolation

300V

Power Requirement

9-30 VDC @ 2.2W

# of Ports

16/8

Operating Temperature

0°C to 70°C (32°F to 158°F)

OEM

Yes

Number of Inputs/Outputs

16 Inputs8 Outputs

Host Interface(s)

RS-232

Input Range

5-30 VDC

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Contact Bounce Time

2ms max.

Extended Temperature

Call for Options

Dimensions

7.5 (L) x 5.0 (W) x 0.8 (H)

Digital I/O

Form C Relay Outputs, Isolated Inputs

Contact Voltage

60VDC max. / 50VAC max.

Contact Release Time

1ms max.

Contact Operate Time

2ms max.

Contact Current

2A max.

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • RS-232 Modbus RTU interface
  • 16 optically isolated inputs
  • 8 SPDT Form C relays
  • Removable screw terminals simplify field wiring
  • Input power via terminal block or modular connector
  • Includes four 3/4 metal standoffs with nuts
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Linux Software

Software: SeaMAX - Linux

Reviews

There are no reviews yet.

Be the first to review “SeaI/O-420S-OEM”

Your email address will not be published. Required fields are marked *

Accessories