Control and monitor up to 96 channels of buffered drive digital I/O via any USB connection with the SeaI/O-462U. The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems.
The SeaI/O-462U makes the I/O available via dual DB-78 female connectors. For easy connection to relay racks, Sealevel offers a six-foot cable (Item# CA237) that terminates each DB-78 to two industry standard 50-pin IDC connectors. The SeaI/O-462U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
Communicate with the SeaI/O-462U using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API
software libraries from your application program. Sealevel's SeaMAX
software drivers and utilities make installation and operation easy using Microsoft Windows
Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
The SeaI/O-462U integrates Sealevel's SeaLATCH locking USB
port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook
that will provide helpful information that you will use again and again. Check out Chapter 1
for an overview of logic principles.