RS-485 Modbus RTU Interface to 8 Isolated Inputs / 8 High-Current Form C Relay Outputs OEM board

Part: 520M-OEM   Model: SeaI/O-520M-OEM

$252.00

Need some help? Contact us

Description

Control and monitor 8 optically isolated inputs and 8 (SPDT) high-current Form C relay outputs with the SeaI/O-520M-OEM. Inputs can range from 5-30VDC and optical isolation protects the computer and other sensitive equipment from voltage transients and ground loops that are common in industrial environments. The high-current Form C relays can switch up to 6A loads at 250VAC and up to 5A at 30VDC. Form C relays can be wired for either normally open or normally closed operation. Field wiring is made easy via removable 3.5mm terminal blocks. The SeaI/O-520M-OEM is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-520M-OEM using industry-standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O OEM boards are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

Family

SeaI/O

Input Isolation

300V

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

Power Requirement

9-30 VDC @ 3.5W

# of Ports

8/8

Operating Temperature

0°C to 70°C (32°F to 158°F)

OEM

Yes

Number of Inputs/Outputs

8 Inputs8 Outputs

Host Interface(s)

RS-485

Input Range

5-30 VDC

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Contact Current AC

6A max.

Extended Temperature

Call for Options

Dimensions

7.5 (L) x 5.0 (W) x 0.8 (H)

Digital I/O

Form C Relay Outputs, Isolated Inputs

Contact Voltage

250VAC30VDC

Contact Release Time

10ms max.

Contact Operate Time

10ms max.

Contact Current DC

30 VDC @ 5A max

Switching Capacity

5 VDC @ 100mA min.

  • RS-485 Modbus RTU interface
    8 optically isolated inputs
  • 8 SPDT high-current Form C relays
  • Removable screw terminals simplify field wiring
  • Includes four 3/4 metal standoffs with nuts
    Input power via terminal block or modular connector
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Linux Software

Software: SeaMAX - Linux

Reviews

There are no reviews yet.

Be the first to review “SeaI/O-520M-OEM”

Your email address will not be published. Required fields are marked *

Accessories