USB to 16 Isolated Inputs / 16 Open-Collector Outputs

Part: 530U   Model: SeaI/O-530U

$421.00

Need some help? Contact us

Description

Control and monitor 16 optically isolated inputs and 16 open-collector outputs via any USB connection with the SeaI/O-530U. Inputs can range from 5-30VDC, while the open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Inputs are grouped into four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Outputs are grouped in eight-bit ports which share high and low voltage inputs.

The SeaI/O-530U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-530U using Sealevel SeaMAX API software libraries or use any Modbus RTU compliant device. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

The SeaI/O-530U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Categories: ,

Additional information

Family

SeaI/O

Operating Temperature

-25°C to 85°C (-13°F to 185°F)

RoHS Compliant

Yes

Power Requirement

9-30 VDC @ 1.7W

# of Ports

16/16

Output Voltage

Max. 60VDC

Output Type

Open-Collector

Output Power

DC 60W max.

Output Isolation

2500VAC RMS, 3500VDC

Output Dissipation

Max. 1000mA (single), Max. 2000mA (port)

Number of Inputs/Outputs

16 Inputs / 16 Outputs

Digital I/O

Isolated Inputs, Open-Collector Outputs

Host Interface(s)

USB

Input Impedance

6.2K Ohms (in series)

Input Range

5-30 VDC

Input Isolation

2500VAC RMS, 3500VDC

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Extended Temperature

Call for Options

Dimensions

7.5 (L) x 5.1 (W) x 1.3 (H)

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • 16 optically isolated inputs
  • 16 open collector outputs
  • Removable screw terminals simplify field wiring
  • Input power via terminal block or modular connector
  • Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
  • Optional DIN rail or table mount
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
  • Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)

Windows Software

Software: SeaMAX - Windows

Linux Software

Software: SeaMAX - Linux

Datasheet

Datasheet: 530U

Reviews

There are no reviews yet.

Be the first to review “SeaI/O-530U”

Your email address will not be published. Required fields are marked *

Accessories