RS-485 Modbus RTU Interface to 8 16-bit A/D, 8 Isolated Inputs, 8 Form C Relay Outputs Multifunction Module

Part: 570M   Model: SeaI/O-570M

$385.00

Need some help? Contact us

Description

The SeaI/O-570M, designed using the Linear Technology LTC1867 A/D chip, provides eight single-ended 16-bit analog inputs, eight optically isolated inputs, and eight Form C relay outputs.

The A/D inputs are independently software-selectable for +/- 5V or +/- 15V ranges and feature high input impedance, allowing easy connection to a variety of sensors. The A/D inputs support floating/non-referenced or ground-referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes, and a dipswitch enables a bias voltage of +5 through a 10K resistor for thermistor input mode.

The SeaI/O-570M module features eight optically isolated inputs rated for 5-30VDC and provides 3500 VDC external isolation, while the Form C relays are configurable as normally-open or normally-closed and can switch DC loads up to 24W. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-570M includes removable terminal blocks, which simplify field-wiring connections.

The SeaI/O-570M is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. The modules operate over a wide operating temperature range of -20°C to 70°C and extended temperature range is optional.

Communicate with the SeaI/O-570M using the Sealevel SeaMAX API software libraries or use any Modbus RTU compliant device. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

A/D Chip

Linear Technology LTC1867

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

RoHS Compliant

Yes

Power Requirement

9-30 VDC @ 2.3W

Power Connector

1.3mm Barrel, Terminal Block, RJ45 Pass-Through

# of Ports

8/8/8

Output Type

Form C Relay

Output Specification

24 VDC @ 1A

Operating Temperature

-20°C to 70°C (-4°F to 158°F)

Number of Inputs/Outputs

16 Inputs / 8 Outputs

Host Interface(s)

RS-485

Input Impedance

6.2 K Ohms (in series)

Input Range

5-30 VDC

Input Isolation

2500 VAC RMS, 3500 VDC

Field Wiring

16 – 30 AWG

A/D Inputs

8 Single-Ended

Extended Temperature

Call for Options

Dimensions

7.5 (L) x 5.1 (W) x 1.3 (H)

Digital I/O

Form C Relay Outputs, Isolated Inputs

Contact Voltage

30VDC max.

Contact Release Time

5ms max.

Contact Operate Time

5ms max.

Contact Current

2A max.

Contact Bounce Time

7ms max.

Family

SeaI/O

Analog I/O

A/D Inputs

A/D Resolution

16-bits

A/D Range

+/-5V, +/-15V

Switching Capacity

24W

  • RS-485 Modbus RTU interface
  • 8 single-ended 16-bit analog inputs
  • 8 optically isolated inputs
  • 8 Form C relay outputs
  • Removable screw terminals simplify field wiring
  • Input power via terminal block or modular connector
  • DIN rail or table mount
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Linux Software

Software: SeaMAX - Linux

Datasheet

Datasheet: 570M

Reviews

There are no reviews yet.

Be the first to review “SeaI/O-570M”

Your email address will not be published. Required fields are marked *

Accessories