My Cart
The 8011 digital I/O interface provides 8 optically isolated inputs and 8 Form C relay outputs. The inputs protect the PC and other sensitive equipment from spikes and ground loop current that can be generated in industrial environments, while the outputs provide higher current capabilities (up to 2A) and are optimized for 24V operation. Form C relays can be wired for either normally open or normally closed operation.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
| Host Interface | PCI |
|---|---|
| # of Ports | 8/8 |
| Digital I/O | Isolated Inputs, Form C Relay Outputs |
| RoHS | Yes |
| PC Bracket | Standard Height |
| Integration | No |
| Number of Inputs/Outputs | 8 Inputs 8 Outputs |
| Power Requirement | +5V @ 380mA |
| Input Range | 5-30 VDC |
| Input Isolation | 300V |
| Contact Voltage | 60 VDC/VAC |
| Contact Current | 2A max. |
| Board Connector | DB-44F |
| Operating Temperature | 0 - +70C |
| Extended Temperature | Call for Options |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
- • Compliant with RoHS and WEEE directives
- • Eight Form C relay outputs (SPDT)
- • Eight optically isolated inputs optimized for +24V
- • Multiple adapters can reside in the same computer
- • SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
- • Software support for DOS, Linux, Windows 3.1 and Windows 95 available
 Part#KT108 Terminal Block Kit
$58.95
|
 Part#CA184 DB44M to DB37F/DB37M Cable
$35.95
|
 Part#REF101 The Digital I/O Handbook
$19.95
|
 Part#REF102 The Digital I/O Handbook (*Free)
$0.00
|
 Part#TB08-KT Terminal Block
$39.95
|
 Part#CA185 DB44 Extension Cable
$19.95
|
 Part#KT109 Terminal Block Kit
$99.95
|