Search Now
6510 SeaRAQ 8 Channel-to-Channel Isolated A/D Inputs
6510 SeaRAQ 8 Channel-to-Channel Isolated A/D Inputs

Part# 6510

(SeaRAQ-6510)

SeaRAQ 8 Channel-to-Channel Isolated A/D Inputs


Be the first to review this product

$749.00


Don't see what you need? Ask about a custom product.

Where to Buy | Email Sales |
Or call us at: 864.843.4343
SeaRAQ™ I/O expansion modules provide unprecedented expansion capabilities for the Sealevel Relio R3 and Relio R4 industrial computers. The 6510 provides eight general purpose 16-bit A/D channels that can be individually configured for 4-20 mA current loop, 0-5V or 0-10V voltage inputs. For maximum protection from damaging external voltages commonly found in industrial environments, the SeaRAQ 6510 expansion board includes 1500 VAC of channel-to-channel and field-to-logic isolation.

The current loop receiver inputs are ideal for interfacing a wide variety of industrial process control and test equipment that use 4-20 mA signaling. The 4-20 mA standard remains a popular method for signal transmission in harsh environments, even over long distances. Current loop has a low sensitivity to electrical noise and is not affected by signal loss over cable runs or interconnections. For easy, reliable field wiring, the board uses removable, high-retention terminal block connectors.

Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Communicate using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Brand/Family SeaRAQ
Modbus Yes
Analog I/O A/D Inputs
RoHS Compliant Yes
A/D Inputs 8 Analog Inputs
A/D Resolution 16-bits
A/D Range 0-20 mA, 4-20 mA, 0-5V, 0-10V
Input Isolation 1500 VAC RMS (Channel-to-Channel and Field-to-Logic)
Input Impedance 250 Ohms
Field Wiring 16-30 AWG
Plate Connectors High-Retention, Removable Terminal Blocks
Operating Temperature 0 - +70C
Extended Temperature Call for Options
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions PCB is 6.00" (L) x 4.35" (W)
  • • General purpose A/D expansion module with eight (8) 16-bit, single-ended inputs
  • • 1500 VAC field-to-logic and channel-to-channel isolation
  • • Each input can be individually configured for 4-20 mA, 0-5V or 0-10V
  • • 18-32 VDC user loop voltage range in 4-20 mA current mode
  • • Industry standard Modbus RTU interface
  • • Input power provided via backplane connector
  • • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • • Includes 20-position, removable, high-retention Phoenix terminal blocks
  • • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems




The Digital I/O Handbook (*Free)
Part#REF102
The Digital I/O Handbook (*Free)

$0.01

The Digital I/O Handbook
Part#REF101
The Digital I/O Handbook

$19.95

     
Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.