My Cart
Optimized for sensing 24V, the 3093H ISA digital I/O interface card provides 32 optically isolated inputs and 32 Reed relay outputs. The inputs protect the PC and other sensitive equipment from spikes and ground loop current that can be generated in industrial environments, while the outputs provide high quality, long-life, low-current (10 Watt maximum), dry contact switch closures. Reed relays are well suited for low current applications. The relays are normally open, and close when energized.
The inputs on the 3093H are rated for 10-30V. For 3-13V inputs, order the 3093.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
| Host Interface | ISA |
|---|---|
| # of Ports | 16/16 |
| Digital I/O | Isolated Inputs, Reed Relay Outputs |
| Integration | No |
| Number of Inputs/Outputs | 16 Inputs 16 Outputs |
| Power Requirement | +5V @ 800mA +12V @ 50mA |
| Input Range | 10-30 VDC |
| Input Isolation | 400V (Optical) |
| Contact Voltage | 100 VDC/VAC |
| Contact Current | 500 mA |
| Board Connector | One DB-37M One DB-37F |
| Operating Temperature | 0 - +70C |
| Extended Temperature | Call for Options |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
• 16 Reed relay outputs (SPST)
• 16 optically isolated inputs optimized for +24V
• Highly reliable 10VA DIP Reed relays
• Power (+5V and +12V) and ground provided on connector
• Supports interrupts 2/9 - 7
• Selectable port addressing (100H - 3FFH)
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
• 16 optically isolated inputs optimized for +24V
• Highly reliable 10VA DIP Reed relays
• Power (+5V and +12V) and ground provided on connector
• Supports interrupts 2/9 - 7
• Selectable port addressing (100H - 3FFH)
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
 Part#REF101 The Digital I/O Handbook
$19.95
|
 Part#TB02-KT Terminal Block
$39.95
|
 Part#CA112 DB37 Extension Cable
$9.95
|
 Part#KT101 Terminal Block Kit
$48.95
|
 Part#REF102 The Digital I/O Handbook (*Free)
$0.00
|