My Cart
The 3096 ISA digital I/O interface card provides 8 optically isolated inputs and 8 Reed relay outputs. The inputs protect the PC and other sensitive equipment from spikes and ground loop current that can be generated in industrial environments, while the outputs provide high quality, long-life, low-current (10 Watt maximum), dry contact switch closures. Reed relays are well suited for low current applications. The relays are normally open, and close when energized.
The inputs on the 3096 are rated for 3-13V. For 10-30V inputs, order the 3096H.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
| Host Interface | ISA |
|---|---|
| # of Ports | 8/8 |
| Digital I/O | Isolated Inputs, Reed Relay Outputs |
| Integration | No |
| Number of Inputs/Outputs | 8 Inputs 8 Outputs |
| Power Requirement | +5V @ 270mA |
| Input Range | 3-13 VDC |
| Input Isolation | 400V (Optical) |
| Contact Voltage | 100 VDC/VAC |
| Contact Current | 500 mA |
| Board Connector | DB-37M |
| Operating Temperature | 0 - +70C |
| Extended Temperature | Call for Options |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
• Eight Reed relay outputs (SPST)
• Eight optically isolated inputs
• Highly reliable 10VA DIP Reed relays
• Power (+5V and +12V) and ground provided on connector
• Supports interrupts 2/9 - 7
• Selectable port addressing (100H - 3FFH)
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
• Eight optically isolated inputs
• Highly reliable 10VA DIP Reed relays
• Power (+5V and +12V) and ground provided on connector
• Supports interrupts 2/9 - 7
• Selectable port addressing (100H - 3FFH)
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
 Part#TB02-KT Terminal Block
$39.95
|
 Part#CA112 DB37 Extension Cable
$9.95
|
 Part#REF101 The Digital I/O Handbook
$19.95
|
 Part#REF102 The Digital I/O Handbook (*Free)
$0.00
|
 Part#KT101 Terminal Block Kit
$48.95
|