PCI 16 Reed Relay Output Digital Interface

Part: 8003   Model: REL-16.PCI

(1 customer review)

Call for price

Need some help? Contact us

Description

THIS PRODUCT IS OBSOLETE DUE TO LACK OF COMPONENT AVAILABILITY. PLEASE CONTACT YOUR SALES REPRESENTATIVE FOR FURTHER INFORMATION AND NEW PRODUCT ALTERNATIVES.

Sealevel will support legacy products through technical and warranty support, software drivers and product manuals. Please contact Sales for further information.

The 8003 PCI digital I/O interface provides 16 Reed relay outputs provide high quality, long-life, low current (10 Watt maximum), dry contact switch closures. Reed relays are well suited for low-current applications. The relays are normally open, and close when energized. Writing a 1 to the proper port bit can individually energize each relay.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

Board Connector

DB-37M

Contact Current

500 mA

Contact Voltage

100 VDC/VAC

Digital I/O

Reed Relay Outputs

Extended Temperature

Call for Options

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)

PCI

Number of Inputs/Outputs

16 Outputs

Operating Temperature

0°C to 70°C (32°F to 158°F)

PC Bracket

Standard Height

# of Ports

16

Power Requirement

+5V @ 360mA

RoHS Compliant

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • Compliant with RoHS and WEEE directives
  • 16 Reed relay outputs (SPST)
  • Highly reliable 10VA DIP Reed relays
  • Power (+5V and +12V) and ground provided on connector
  • SeaIO Classic software supports Microsoft Windows operating systems
  • Software support for Linux available

Manual

Manual: 8003

1 review for REL-16.PCI

  1. Charlie T.

    Absolutely bulletproof
    At both Globecast North America and Hero Broadcasting, and now also Prime Time Partners, I’ve used your 8003 and 8006 boards to automate TV channel playout. We use a PC with custom software and your drivers to sequence commercial and program events according to the daily schedule we get from our Traffic department. With almost 20 years of using your boards we’ve never had a failure – the boards are bulletproof.
    We are currently originating 16 channels of SD and HD TV from our headquarters in Miami Lakes, FL. We distribute our channels to CA, AZ, MA, NY, PA and FL.
    The TB02 breakouts make input and output connections incredibly neat and simple. I always buy the whole kit with the cables, breakouts and hardware.
    I couldn’t be happier with your products, your drivers and your service. Many thanks to all the Sealevel folks involved – y’all should be very proud.

Add a review

Your email address will not be published. Required fields are marked *