PCI 24 Channel TTL Digital Interface

Part: 8018S   Model: PIO-24.LPCI

Call for price

Need some help? Contact us

Description

The 8018S Low Profile PCI digital I/O interface provides 24 channels of buffered drive digital I/O emulating 8255 mode zero. The board can be utilized for PC-based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. 10K pull-up resistors are included and optional values are available.

The 8018S contains three groups of eight-bit I/O ports. Each group is individually configurable as input or output to suit the automation task. The board is Universal Bus (3.3V and 5V) compatible and ships with a ribbon cable terminating in an industry-standard 50-pin IDC connector.

The 8018S is for use in standard size PCI slots only. If you have a Low Profile PCI slot, order the 8018.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Windows and Linux operating systems.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Category:

Additional information

Board Connector

50-Pin Header

Digital I/O

TTL I/O

Extended Temperature

Call for Options

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)

PCI

Number of Inputs/Outputs

24 (TTL)

Operating Temperature

0°C to 70°C (32°F to 158°F)

Output Specification

Sink up to 24mA, Source up to 15mA

PC Bracket

Standard Height

# of Ports

24

Power Requirement

+5V @ 1A

RoHS Compliant

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • Compliant with RoHS and WEEE directives
  • 24 channels of buffered TTL I/O
  • Each 8-bit port individually configurable as input or output
  • 8255 mode 0 compatible
  • 10K pull up resistors on each bit
  • +5V power and ground provided on connector
  • MD1 Low Profile and Universal Bus (3.3V and 5V) compatible
  • Includes a 40 inch ribbon cable with (2) 26-pin IDC connectors to an industry-standard 50-pin IDC connector (Item# CA315)
  • SeaIO Classic software supports Microsoft Windows operating systems
  • Software support for Linux available

Datasheet

Datasheet: 8018S

Reviews

There are no reviews yet.

Be the first to review “PIO-24.LPCI”

Your email address will not be published. Required fields are marked *