Power Over Ethernet (PoE) Kit with 5V/12V Switch

Part: POE-SP-KT   Model: Power Over Ethernet Kit

Call for price

Need some help? Contact us

Description

THIS PRODUCT IS OBSOLETE DUE TO LACK OF COMPONENT AVAILABILITY. PLEASE CONTACT YOUR SALES REPRESENTATIVE FOR FURTHER INFORMATION AND PRODUCT ALTERNATIVES.

For new Power over Ethernet installations, the POE-SP-KT allows you to quickly and conveniently power your Sealevel SeaI/O Ethernet digital I/O module or Ethernet serial server. You never have to worry if a power outlet is near your Ethernet I/O device. The POE-SP-KT is made up of two primary parts a PoE injector and a PoE extractor. Connect the injector to a power outlet with the included power supply and then connect to your network. The injector requires no setup and supplies power and data to the extractor, up to 100 meters away (328 feet).

The extractor includes a 5V/12V switch that allows it to work with virtually any 5V or 12V Ethernet device. Select the appropriate voltage and connect the extractor to the network near your Sealevel Ethernet device. Using the supplied network patch cable and power cord, connect your Sealevel device to the extractor. You are now ready to use your Sealevel device.

The POE-SP-KT is only for adding a new power over Ethernet solution where both units will be used together, and is not for use with existing PoE network installations. If you already have a PoE endspan network switch or PoE midspan injector, order the POE-SP-EX that provides an IEEE 802.3af compliant PoE extractor.

Category:

Additional information

Output Voltage

12 VDC, 5 VDC

Dimensions

52mm (L) x 81mm (W) x 28mm (H)

Input Voltage

100-240VAC, 50/60Hz

Operating Temperature

0°C to 40°C (32°C to 104°C)

Output Voltage

5VDC @ 2.5A12VDC @ 1A

PSU Type

PoE

Storage Temperature

-40°C to 70°C (-40°F to 158°F)

Transmit power up to 100 meters (328 feet) to Ethernet device
Extractor provides selectable 5V or 12V power output switch
No tools or software simply select voltage and plug in units
Includes power LEDs on both units
Certifications: FCC Class B, CE, C-Tick
Includes cable with 2.1mm connector for powering Sealevel 5V Ethernet devices
Includes 2.1mm to 1.3mm barrel adapter for powering Sealevel 12V Ethernet devices
Refer to the user manual for your Ethernet device to ensure that this POE solution provides sufficient current for your device
RJ45 Pins: Data: 1, 2, 3, 6 — Power: 4, 5, 7, 8
NOTE: Select correct voltage prior to connecting to your Ethernet device to prevent accidental damage

Reviews

There are no reviews yet.

Be the first to review “Power Over Ethernet Kit”

Your email address will not be published. Required fields are marked *