Low Profile PCI Express 1-Port RS-232, RS-422, RS-485, RS-530 Serial Interface

Part: 7106e   Model: Ultra 530.LPCIe

Call for price

Need some help? Contact us

Description

The 7106e low-profile PCI Express serial interface provides a single serial port configurable for RS-232, RS-422, RS-485, or RS-530. The ultra-high-speed UART, flexible clock prescaler, and large 256-byte Tx/Rx FIFOs allows the adapter to support the widest range of standard and non-standard baud rates exceeding 921.6 Kbps. These features make the 7106e ideal for data-intensive applications that require reliable, ultra-fast throughput rates.

The electrical interface, echo suppression, and line termination are set via convenient on-board DIP switches, which can be overridden by the Windows device driver. Additionally, the Windows driver provides a software-selectable Slew Rate Limiting feature to minimize electromagnetic interference where high baud rates are not required. For rapid troubleshooting, onboard LEDs display the board heartbeat, electrical interface selection, and line termination state.

In RS-485 mode, the transmitter is automatically enabled in hardware for Windows applications, eliminating the need for software control. This allows the 7106e to be used with standard serial communications applications and removes the risk of bus contention and data corruption. In RS-232 mode, all modem control signals are implemented for maximum compatibility with a wide range of serial peripherals.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows or Linux operating systems.

The 7106e is a PCI Express X1 board compatible with any low profile PCI Express slot. A standard profile bracket is also included. The 7106e is RoHS compliant and meets the requirements of RoHS (2011/65/EU) directive.

Category:

Additional information

Communications Chip

Ultra high-speed UART

Electrical Interface

RS-232, RS-422, RS-485, RS-530

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)

PCI Express

Max Data Distance

4000 feet (RS-485)

Max Data Rate

Exceeds 921.6K bps

Operating Temperature

0°C to 70°C (32°F to 158°F)

Oscillator

125 MHz BRG

PC Bracket

Low Profile, Standard Height

# of Ports

1

RoHS Compliant

Yes

Serial Connector(s)

DB25M

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • Compliant with RoHS and WEEE directives
  • Serial port configurable for RS-232, RS-422, RS-485 or RS-530
  • Electrical interface selection via on-board DIP switch with Windows device driver override
  • Windows driver features software-selectable 250K slew rate limiting to minimize electromagnetic interference
  • Ultra high-speed UART with 256-byte Tx and Rx FIFOs
  • Supports asynchronous data rates exceeding 921.6K bps
  • Bus-derived 125 MHz BRG and clock prescaler support wide range of baud rates
  • Automatic RS-485 enable/disable for Windows applications
  • PCI Express X1 compliant
  • Compatible with any low profile PCI Express slot. A standard profile bracket is also included
  • All modem control signals implemented in RS-232 mode
  • Board includes one DB25M connector

Windows Software

Software: SeaCOM - Windows

Datasheet

Datasheet: 7106e

Reviews

There are no reviews yet.

Be the first to review “Ultra 530.LPCIe”

Your email address will not be published. Required fields are marked *