USB to 8-Port RS-232 RJ45 Serial Interface Adapter, Bus-Powered

Part: 2804   Model: SeaLINK+8/232.RJ

RJ45 Power Options

$450.00

Need some help? Contact us

Description

The SeaLINK® 2804 8-port USB to serial adapter offers an easy way to connect multiple serial devices via a single USB port. The 2804 uses a state-machine architecture that greatly reduces the host computer’s overhead when communicating over multiple ports simultaneously. RS-232 data rates up to 921.6K bps are supported. The 2804 is housed in a rugged, attractive plastic enclosure with a high-retention USB type B connector that prevents accidental disconnection of the included USB cable.

Sealevel’s SeaCOM USB software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. After installing the software, the serial ports appear as standard COM ports to the host system enabling compatibility with legacy software.

The 2804 is USB bus-powered, so no external power supply is required. For conveniently powering serial peripherals, ordering options allow an external power source to be connected to a DC jack on the rear of the unit. The supplied power is fused and connected to pin 5 on each of the eight RJ45 connectors. Select the appropriate configuration option for your application. Optional power supplies are available under the Accessories tab.

Do you know that adapter design can impact your application? Find out how in this USB Serial performance report.

Category:

Additional information

Operating Temperature

0°C to 70°C (32°F to 158°F)

USB Specification

1.1 Compliant2.0 Compatible

USB Powered

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

Serial Connector(s)

RJ45

RoHS Compliant

Yes

Power Requirement

+5V @ 500mA

Family

SeaLINK

Max Data Rate

921.6K bps

Communications Chip

USB/UART

Max Data Distance

50 feet

Host Interface(s)

USB

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

High Retention USB

Yes

Electrical Interface

RS-232

Dimensions

9.2 (L) x 5.3 (W) x 1.7 (H)

# of Ports

8

  • Compliant with RoHS and WEEE directives
  • Utilizes high-speed UARTs with 128-byte Tx FIFOs and 384-byte Rx FIFOs
  • Housed in rugged, attractive plastic enclosure
  • Powered by USB connection
  • Optionally configured to power 5, 12 or 24 VDC serial peripherals
  • Optional external power is internally fused and connected to pin 5 on each RJ45 connector
  • Provides 8 RJ45 serial ports with Tx/Rx status LEDs
  • High-retention USB type B connector prevents accidental disconnection of USB cable
  • Integrates transmit and receive LED indicators on each port
  • Sealevel software supports Windows and Linux operating systems
  • Includes 72-inch USB cable (Item# CA179)

Windows Software

Software: SeaCOM - Windows

Linux Software

Software: SeaCOM - Linux

Datasheet

Datasheet: 2804

Manual

Manual: 2804

Reviews

There are no reviews yet.

Be the first to review “SeaLINK+8/232.RJ”

Your email address will not be published. Required fields are marked *