Test Applications with the Digital I/O Simulator

Hardware:
A PC with Sealevel PIO Adapter (Part# 8005, 8008, 8009, 8010) or USB SeaLINK (Part# 8203, 8205), connected to Sealevel TA01, Relay Rack I/O Simulator terminal block with CA167 cable. The CA167 cable from the PC to terminal block is available as an option.

PC with TA01 Relay Rack Simulator

Software Control:
Run VBTest or VCTest to cause the LEDs to turn ON and display the switch inputs. Set the ports to input or output through the control panel. Use the TA01 to develop your application program and simulate a solid state relay rack before going live on-site.

VBTest

VBTest

VCTest

VCTest

Resources

Recent FAQs

  • What network speeds can SeaI/O Ethernet (SeaI/O-E) modules handle?
  • What are the advantages of using an advanced UART?
  • SeaMAC: ssiEncodingNone vs ssiEncodingNrz
  • How can the RJ-45 connections on RS-232 and RS-485 SeaI/O data acquisition devices be used?
  • Is the 7203e PCIe serial interface dip switch or software configurable to change the RS-485 termination from a 120 Ohm resistor to an AC termination?

    • Subscribe to our e-Newsletter

    Subscribe