Responsive. Ready. Rock star treatment.


For live, friendly, technical support please call us at 864-843-4343 or email support@sealevel.com
What clock pins do I need to connect when testing my synchronous serial card with a loop back?
Reference Number: AA-00166 Views: 3077 Created: 12/09/2009 09:12 am Last Updated: 09/02/2016 05:31 pm 0 Rating/ Voters


For Sealevel synchronous serial products, after connecting the Transmit (TX) and Receive (RX) pins, you will need to connect the Clock Output pin (TSET) to the Clock Input pin (RXC). In most cases, the Clock Output pin (TSET) should be used as the board's output clock. Transmit Clock (TXC) is an input and should not be used.

Proudly Made in the USA
© Copyright 1996 - 2016, Sealevel Systems, Inc. All rights reserved.