Responsive. Ready. Rock star treatment.

For live, friendly, technical support please call us at 864-843-4343 or email
Which Sealevel digital I/O products are compatible with "open-collector" outputs?
Reference Number: AA-00438 Views: 2333 Created: 03/31/2010 12:00 am Last Updated: 09/02/2016 04:23 pm 0 Rating/ Voters

Depending on your application, Sealevel digital I/O products with either optically isolated inputs or TTL level signaling can be used.

Sealevel products with TTL inputs require tight coupling and will work for simple applications where there is a short distance between the input and output modules. TTL signals require voltages of 5 VDC.

Sealevel digital I/O devices with optically isolated inputs offer increased flexibly over TTL level inputs. The optically isolated inputs can interface over greater distances than possible with TTL signals. Optically isolated inputs are compatible with higher voltages (typically 5-30 VDC) and offer protection from ground loops. Each optically isolated input has an inline current limiting resistor and is non-polarized, so they can be wired without regard to the polarity.

Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.