Responsive. Ready. Rock star treatment.


For live, friendly, technical support please call us at 864-843-4343 or email support@sealevel.com
How do I change the COM port assignment for my asynchronous serial adapter?
Reference Number: AA-00440 Views: 2479 Created: 04/30/2010 05:20 pm Last Updated: 09/02/2016 05:37 pm 0 Rating/ Voters


Sealevel recommends using the installed COM numbers if at all possible to avoid system conflicts. If you previously installed a USB or PCMCIA serial interface, it will have resources assigned by the operating system. If the device is not currently connected to your computer, these COM assignments will not be apparent and forcing new COM port assignments will create a conflict when the devices are reconnected at a later time.

One scenario where you would have to change the COM port assignments is when your legacy application only works at COM1 through COM4 and the Sealevel serial device you installed comes in at COM5 or higher. Another scenario might occur when you install a multiport serial card and the COM port numbers are not assigned consecutively and you want them to appear consecutive.

In Windows 7, Vista, XP, or 2000, you can change the COM port assignments in Device Manager. In Windows 95, 98, ME, or NT, you’ll need to use Sealevel’s Port Manager or Advanced Ports utility.


Proudly Made in the USA
© Copyright 1996 - 2016, Sealevel Systems, Inc. All rights reserved.