Responsive. Ready. Rock star treatment.

For live, friendly, technical support please call us at 864-843-4343 or email
How do I configure the R5200 to automatically boot up after a power loss?
Reference Number: AA-00484 Views: 3349 Created: 02/28/2011 06:47 pm Last Updated: 09/02/2016 04:15 pm 0 Rating/ Voters

The R5200 industrial computer supports boot up after a power failure scenario. The default setting is ‘OFF’.

To enable this feature, access the BIOS settings by pressing the DEL button from the start-up splash screen.

Once in the BIOS, navigate to ‘Integrated Peripherals’ – ‘SuperIO Device’ – ‘Power On after PWR-Fail’. Select the ‘ON’ option and then press F10 to save the changes and exit the BIOS settings. The R5200 will now reboot automatically after a power failure.

Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.