Responsive. Ready. Rock star treatment.


For live, friendly, technical support please call us at 864-843-4343 or email support@sealevel.com
Categories
There are no subcategories in this category.
1 Controlling a Motor Using a SeaI/O Module with DAQFactory HMI Software Featured

By: Will Rostron, Applications Engineer Introduction This support article compliments the application example video, below. Sealevel offers many digital and analog I/O adapters that are compatible with the industry standard Modbus protocol. Modbus is supported…

2 Control a DC Fan with a Digital I/O Relay

Hardware: A PC with Sealevel PLC-16.PCI (Part# 8011) board installed, connected to Sealevel TB08 terminal block. The cable from the PC to terminal block is supplied. Visual Basic Application to turn on fan:

3 Control Industrial Devices with USB Digital I/O

Hardware: A PC or Laptop with Sealevel SeaLINK USB PIO-48 Adapter (Part# 8203) connected to an industry standard relay rack on DIN rail mounting track controlling a light pole or other industrial device. The USB cable (Part# CA179) is included with the 8203.…

4 How to connect buttons & LEDs to Digital I/O

Hardware: A PC with Sealevel PIO-48.PCI (Part# 8005) or USB SeaPORT PIO-48 products, connected to Sealevel TB07, terminal block with CA167 cable. The cable from the PC to terminal block is available as an option. Software Control:Run VBTEST or VCTEST to monitor…

5 How To Control a Pro CD Player with Digital I/O

Hardware: A PC with Sealevel DIO-16.PCI Adapter (Part# 8002) or USB SeaLINK (Part# 8208), connected to Sealevel TB02 terminal block with CA112 cable. The TB02 and CA112 cable are available in a kit as Part# KT101. Software Control: Reed Relay output provides…

6 How to Switch Highly Inductive Loads Using Digital I/O

Application Example: Highly inductive loads, those that use magnetic fields such as DC motors, produce a surge of voltage (referred to as "blowback voltage") when a relay is opened, breaking power to the electrical circuit. This surge of blowback voltage…

7 Test Applications with the Digital I/O Simulator

Hardware:A PC with Sealevel PIO Adapter (Part# 8005, 8008, 8009, 8010) or USB SeaLINK (Part# 8203, 8205), connected to Sealevel TA01, Relay Rack I/O Simulator terminal block with CA167 cable. The CA167 cable from the PC to terminal block is available as an…

Proudly Made in the USA
© Copyright 1996 - 2016, Sealevel Systems, Inc. All rights reserved.