My Cart
The 3710 PC/104 digital I/O interface utilizes 16 Reed relay outputs providing high quality, long-life, low current (10 Watt maximum), dry contact switch closures. Reed relays are well suited for low current applications. The relays are normally open, and close when energized. Writing a 1 to the proper port bit can individually energize each relay.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
| Host Interface | PC/104 |
|---|---|
| # of Ports | 16 |
| Digital I/O | Reed Relay Outputs |
| Integration | No |
| Number of Inputs/Outputs | 16 Outputs |
| Power Requirement | +5V @ 125mA |
| Contact Voltage | 100 VDC/VAC |
| Contact Current | 500 mA |
| Board Connector | 40-Pin Header |
| Operating Temperature | 0 - +70C |
| Extended Temperature | Call for Options |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
• 16 Reed relay outputs (SPST)
• Highly reliable 10VA DIP Reed relays
• 100 million closures at maximum load
• Power (+5V and +12V) and ground provided on connector
• Right-angle connector available for OEM opportunities, 40-pin vertical header standard
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
• Highly reliable 10VA DIP Reed relays
• 100 million closures at maximum load
• Power (+5V and +12V) and ground provided on connector
• Right-angle connector available for OEM opportunities, 40-pin vertical header standard
• SeaI/O Classic software supports Windows 98, ME, NT, 2000, XP and Vista operating systems
• Software support for DOS, Linux, Windows 3.1 and Windows 95 available
 Part#REF101 The Digital I/O Handbook
$19.95
|
 Part#REF102 The Digital I/O Handbook (*Free)
$0.00
|
 Part#CA110 40-Pin IDC to DB37 Cable
$8.95
|
 Part#TB02-KT Terminal Block
$39.95
|
 Part#KT101 Terminal Block Kit
$48.95
|
 Part#CF104 PC/104 Adapter
$90.00
|
 Part#HD104 PC/104 Hard Drive Adapter
$30.00
|