Search Now
eI/O-170E Ethernet to 8 A/D, 2 Optically Isolated Dry Contact Inputs, 2 Solid-State Relay Outputs, Multifunction I/O Adapter
eI/O-170E Ethernet to 8 A/D, 2 Optically Isolated Dry Contact Inputs, 2 Solid-State Relay Outputs, Multifunction I/O Adapter

Part# 170E

(eI/O AIO-8)

Ethernet to 8 A/D, 2 Optically Isolated Dry Contact Inputs, 2 Solid-State Relay Outputs, Multifunction I/O Adapter


Be the first to review this product

$209.00


Don't see what you need? Ask about a custom product.

Where to Buy | Email Sales |
Or call us at: 864.843.4343
Control and monitor eight 12-bit analog inputs, two optically isolated digital inputs and two solid-state relay outputs via any 10/100BaseT Ethernet connection with the eI/O-170E multifunction I/O module.

The module provides eight single-ended or four differential A/D inputs that are software configurable for 0-5V, 0-10V, +/-5V, and +/-10V ranges. The A/D inputs support floating/non-referenced or ground referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes.

The digital inputs are dry contact, switch-sensing inputs that are internally biased with 5VDC. When the contact closes, current flows through the circuit and an input condition is detected. The inputs are optically isolated and provide 1000VDC isolation to ground. The solid-state Form A SPST relays can switch up to 60VDC at 2.5A. Solid-state relays improve upon mechanical relays by having no moving parts, operating silently and having virtually unlimited switching cycles.

The eI/O-170E receives power via a removable spring-clamp terminal block. The lever-style clamping mechanism requires no tools, which simplifies field installation. The module is powered by your 9-30VDC source, or select from a variety of Sealevel power supply options. I/O connections to field wiring are simplified via removable 3.5mm terminal blocks.

Ready for DIN rail mounting, the eI/O-170E includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

Communicate with eI/O Ethernet digital I/O modules using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development. The Sealevel Mod+ Connect app is an easy-to-use diagnostic utility that allows you to monitor, test and troubleshoot Sealevel eI/O and SeaI/O modules using your iPhone or iPod touch.
Brand/Family HazPAC
Host Interface(s) Ethernet
# of Ports 8/2/2
Digital I/O Isolated Inputs, Solid-State Relays
Analog I/O A/D Inputs
RoHS Compliant Yes
Number of Inputs/Outputs 8 A/D Inputs, 2 Dry Contact Inputs, 2 Solid-State Relay Outputs
A/D Inputs 8 Single-Ended or 4 Differential
A/D Resolution 12-bits
A/D Range 0-5V, 0-10V, +/-5V, +/-10V
Power Requirement 9-30 VDC @ 1.5W
Input Range Dry Contact
Input Isolation 1000VDC
Contact Voltage 60VDC max.
Contact Current 2.5A max.
Contact Operate Time 2.5ms max.
Contact Release Time 0.2ms max.
Field Wiring 16-30 AWG
Operating Temperature 0 - +70C
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions 4.5 (L) x 3.5 (W) x 1.3 (H)
  • • 10/100BaseT Ethernet Modbus TCP interface
  • • 8 12-bit single-ended, or 4 differential analog inputs
  • • 2 optically isolated inputs provide dry contact switch sensing
  • • 2 SPST Form A solid-state relays have no moving parts, operate silently and have virtually unlimited switching cycles
  • • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • • Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
  • • Optional removable spring-clamp terminal blocks available for I/O connections
  • • Input power via removable spring-clamp terminal block
  • • Status LEDs display power, Ethernet link and I/O activity
  • • Sealevel SeaMAX software supports Microsoft Windows operating systems
  • • Housed in rugged, attractive plastic enclosure
  • • Includes 7' CAT5 Ethernet cable (Item# CA246)











CAT5 UTP 7' Patch Cable
Part#CA246
CAT5 UTP 7' Patch Cable

$8.95

CAT5 UTP 10' Patch Cable
Part#CA247
CAT5 UTP 10' Patch Cable

$9.95

Ethernet Crossover Cable
Part#CA251
Ethernet Crossover Cable

$8.95

Spring Clamp Terminal Blocks
Part#TB-SP06-10
Spring Clamp Terminal Blocks

$29.95

eI/O Mounting Brackets
Part#KT131
eI/O Mounting Brackets

$28.95

12 VDC 6W PSU
Part#TR104
12 VDC 6W PSU

$9.00

12 VDC 6W PSU
Part#TR105
12 VDC 6W PSU

$17.00

12 VDC 6W PSU
Part#TR106
12 VDC 6W PSU

$10.00

24 VDC 7.5W PSU
Part#PS101
24 VDC 7.5W PSU

$63.00

24 VDC 50W PSU
Part#PS103
24 VDC 50W PSU

$125.00

The Digital I/O Handbook
Part#REF101
The Digital I/O Handbook

$19.95

The Digital I/O Handbook (*Free)
Part#REF102
The Digital I/O Handbook (*Free)

$0.01

     
Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.