My Cart
The Relio R1330 delivers the processing power of a desktop computer, yet is small enough to be mounted virtually anywhere. The system is housed in a compact, rugged metal enclosure with the same footprint as Sealevel SeaI/O modules. Powered by a 500MHz AMD Geode LX800 CPU and 1GB RAM, the R1330 system offers low power consumption and operates over a wide temperature range. Standard I/O features include two 10/100BaseT Ethernet, four USB, 8 bit GPIO, a parallel printer port and four serial ports. The R1330 is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
The R1330 can operate from CompactFlash and is supported by either XP Embedded or embedded Linux operating systems. For applications that require disk storage, order one of the high-temperature hard drive options listed below. Optional brackets allow for versatile mounting to walls, under counters, on tabletops, or even to DIN rails.
Local or remote I/O expansion is available using Sealevel SeaI/O modules. Choose from a variety of I/O configurations including optically isolated inputs, Reed and Form C relay outputs, TTL interfaces, A/D, and D/A. The unit connects to SeaI/O modules via the system's RJ45 port and communicates using RS-485 Modbus RTU.
| Brand/Family | Relio |
|---|---|
| CPU Speed | 500MHz |
| CPU Type | AMD Geode |
| Memory | 1GB |
| CPU | 500MHz AMD Geode LX800 |
| Max RAM | 1GB Incl. |
| Power Requirement | 9-30 VDC @ 18.0W |
| Operating Temperature | 0 - +50C |
| Extended Temperature | Call for Options |
| Storage Temperature | -10 - +60C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
| Dimensions | 7.5" (L) x 5.1" (W) x 1.8" (H) |
| Approximate Weight | ~2 lbs |
• Embedded 500MHz AMD Geode LX800 CPU
• Solid-state operation using internal CompactFlash memory
• CompactFlash module is accessible without opening the enclosure
• Includes 1GB RAM, max 1GB RAM (DDR PC2700 200-Pin SODIMM, 333 MHz, Non-ECC)
• Two 10/100BaseT RJ45 Ethernet ports
• RJ45 Modbus RTU RS-485 pass-through port (supports N-series SeaI/O expansion modules)
• Four DB9M serial ports (COM1, 3, 4 = RS-232, COM2 = RS-232/422/RS-485)
• COM2 defaults to 2-wire RS-485 and can be accessed via DB9M or RJ45 pass-through connectors
• Four high-speed USB 2.0 ports
• One DB15 UXGA Analog video connector (supports 1600x1200 @ 100Hz and 1920x1440 @ 85Hz)
• One PS2 port for keyboard and mouse (includes Y-cable)
• One DB25F parallel printer port
• Stereo audio out via standard 1/8 speaker connector
• System power via modular connector
• 6-position screw terminal for optional system power and RS-485 2-wire interface
• 8 Bits of general purpose I/O (GPIO) available on 10-position removable screw terminal
• Solid-state operation using internal CompactFlash memory
• CompactFlash module is accessible without opening the enclosure
• Includes 1GB RAM, max 1GB RAM (DDR PC2700 200-Pin SODIMM, 333 MHz, Non-ECC)
• Two 10/100BaseT RJ45 Ethernet ports
• RJ45 Modbus RTU RS-485 pass-through port (supports N-series SeaI/O expansion modules)
• Four DB9M serial ports (COM1, 3, 4 = RS-232, COM2 = RS-232/422/RS-485)
• COM2 defaults to 2-wire RS-485 and can be accessed via DB9M or RJ45 pass-through connectors
• Four high-speed USB 2.0 ports
• One DB15 UXGA Analog video connector (supports 1600x1200 @ 100Hz and 1920x1440 @ 85Hz)
• One PS2 port for keyboard and mouse (includes Y-cable)
• One DB25F parallel printer port
• Stereo audio out via standard 1/8 speaker connector
• System power via modular connector
• 6-position screw terminal for optional system power and RS-485 2-wire interface
• 8 Bits of general purpose I/O (GPIO) available on 10-position removable screw terminal
 Part#CA239 SeaI/O RS-485 Interconnect
$2.95
|
 Part#TR108-US Desktop Power Supply
$44.95
|
 Part#CF-512 512MB CompactFlash Memory
$29.95
|
 Part#CF-1GB 1GB CompactFlash Memory
$79.95
|
 Part#PS105 165 Watt Power Supply
$229.00
|
 Part#PS103 DIN Rail Power Supply
$159.95
|
 Part#CF-1GB-ET 1GB CF Extended Temp
$99.95
|
 Part#HD20ET-INT1 20GB 2.5 Extended Temp HD
$219.95
|
 Part#HD30ET-INT1 30GB 2.5 Extended Temp HD
$279.95
|
 Part#HD80ET-INT1 80GB 2.5 Extended Temp HD
$319.95
|
 Part#410N SeaI/O-410N
$269.00
|
 Part#420N SeaI/O-420N
$259.00
|
 Part#430N SeaI/O-430N
$269.00
|
 Part#440N SeaI/O-440N
$319.00
|
 Part#450N SeaI/O-450N
$279.00
|
 Part#462N SeaI/O-462N
$239.00
|
 Part#463N SeaI/O-463N
$249.00
|
 Part#470N SeaI/O-470N
$429.00
|
 Part#520N SeaI/O-520N
$239.00
|
 Part#647U SeaI/O-647U
$299.00
|
 Part#687U SeaI/O-687U
$499.00
|
 Part#270U SeaI/O-270U
$379.00
|
 Part#HUB7M 7-Port USB 2.0 Hub
$349.00
|
 Part#KT122 SeaI/O Expansion
$8.95
|
 Part#KT125 Universal Mounting Bracket
$69.95
|
 Part#KT123 Flush Mount Bracket
$17.95
|
 Part#DR104 DIN Rail Mounting Clips
$9.95
|
 Part#KT127 Universal Double-Width Mounting Bracket
$79.95
|
 Part#SW-XPPRO-INT Microsoft Windows XP Pro
$189.00
|
 Part#REF101 The Digital I/O Handbook
$19.95
|
 Part#KT130 Side Mount Bracket
$32.95
|