Search Now
eI/O-110PoE Ethernet to 4 Optically Isolated Inputs / 4 Reed Relay Digital Interface Adapter, with PoE (802.3af)
eI/O-110PoE Ethernet to 4 Optically Isolated Inputs / 4 Reed Relay Digital Interface Adapter, with PoE (802.3af)

Part# 110PoE

(eI/O DIO-8)

Ethernet to 4 Optically Isolated Inputs / 4 Reed Relay Digital Interface Adapter, with PoE (802.3af)


$169.00


Don't see what you need? Ask about a custom product.

Where to Buy | Email Sales |
Or call us at: 864.843.4343
Control and monitor four optically isolated inputs and four Reed relay outputs via any 10/100BaseT Ethernet connection with the eI/O-110PoE digital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground, while the Reed relays provide long-life switch closures well suited to low-current devices. Each Reed relay has a discrete common and each pair of inputs share a common for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-110PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-110PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

Communicate with eI/O Ethernet digital I/O modules using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development. The Sealevel Mod+ Connect app is an easy-to-use diagnostic utility that allows you to monitor, test and troubleshoot Sealevel eI/O and SeaI/O modules using your iPhone or iPod touch.
Brand/Family HazPAC
Host Interface(s) Ethernet
PoE Powered Yes
# of Ports 4/4
Digital I/O Isolated Inputs, Reed Relay Outputs
RoHS Compliant Yes
Power Requirement 802.3af PoE Class 0 @ 2.2W (Typical)
Input Range 5-30 VDC
Input Isolation 2500 VAC RMS, 3500 VDC
Input Impedance 6.2 K Ohms (in series)
Contact Voltage 60VDC max.
Contact Current 500mA max.
Contact Operate Time 0.5ms max.
Contact Bounce Time 0.5ms max.
Contact Release Time 0.2ms max.
Field Wiring 16-30 AWG
Operating Temperature 0 - +70C
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions 4.5 (L) x 3.5 (W) x 1.3 (H)
  • • 10/100BaseT Ethernet Modbus TCP interface
  • • 4 optically isolated inputs provide protection against surges and ground loops
  • • 4 SPST Form A Reed relays are well suited to low current devices
  • • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • • Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
  • • Optional removable spring-clamp terminal blocks available for I/O connections
  • • PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
  • • Status LEDs display power, Ethernet link and I/O activity
  • • Sealevel SeaMAX software supports Microsoft Windows operating systems
  • • Housed in rugged, attractive plastic enclosure
  • • Includes 7' CAT5 Ethernet cable (Item# CA246)











CAT5 UTP 7' Patch Cable
Part#CA246
CAT5 UTP 7' Patch Cable

$8.95

CAT5 UTP 10' Patch Cable
Part#CA247
CAT5 UTP 10' Patch Cable

$9.95

Ethernet Crossover Cable
Part#CA251
Ethernet Crossover Cable

$8.95

Spring Clamp Terminal Blocks
Part#TB-SP06-10
Spring Clamp Terminal Blocks

$29.95

eI/O Mounting Brackets
Part#KT131
eI/O Mounting Brackets

$28.95

5-Port Ethernet PoE Switch
Part#POE-SWTC5
5-Port Ethernet PoE Switch

$279.95

The Digital I/O Handbook
Part#REF101
The Digital I/O Handbook

$19.95

The Digital I/O Handbook (*Free)
Part#REF102
The Digital I/O Handbook (*Free)

$0.01

   
Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.