(0)

PC/104 Adapter

Call for Pricing

In Stock:

Type I and Type II CompactFlash memory cards are supported
CompactFlash serial cards and other non-memory CompactFlash cards are not supported
Status LED activity indicator
Includes 0.60 aluminum standoffs for mounting to PC/104 stack (1/4 hex, 4-40 threads)
PC/104 adapter board and CF adapter mounted together with 1/8 nylon standoffs
5V auxiliary power connector available when using 40-pin IDE cable
Supports DMA
CF adapter provides both 40-pin and 44-pin IDE connectors
Push-button card ejector
AC termination on address and strobe signals
Includes 50cm 44-pin IDE ribbon cable (Item# CA272)

Have a Question?
1-864-843-4343
Chat
Email

Print Page

Product Details

With the CF104, you can easily add a CompactFlash memory card with an IDE interface to your PC/104 stack. The CF104 includes an adapter board built to the PC/104 form factor. Due to the arrangement of mounting holes (slots at the corners), the board can be rotated and mounted 180 degrees along the long axis. This offers two different mounting options to simplify cable routing or improve access to the CompactFlash socket.

The CompactFlash adapter supports Type I and Type II cards and connects to the host via an IDE interface. Both 40-pin and 44-pin IDE connectors are provided. IBM MicroDrives and CompactFlash memory cards are supported. An onboard jumper sets the flash drive to master or slave mode and a status LED can be used for monitoring drive activity.

A 44-pin IDE ribbon cable and aluminum standoffs are included. A 40-pin IDE ribbon cable is available as an option.