Part#: 8005

Print Friendly, PDF & Email

PIO-48.PCI

Part#: 8005 Categories: ,

PCI 48 Channel TTL Digital Interface

$199.00

Description

The 8005 digital I/O interface provides 48 channels of buffered drive digital I/O emulating 8255 mode zero, which can be utilized for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. 10K pull-up resistors are included. Optional values are available.

The PIO-48.PCI digital I/O interface board contain 6 groups of eight-bit I/O ports, configurable as inputs or outputs to suit the automation task.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Additional information

Board Connector

(2) 50-Pin Headers

Digital I/O

TTL I/O

Extended Temperature

Call for Options

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)

PCI

Number of Inputs/Outputs

48 (TTL)

Operating Temperature

0°C to 70°C (32°F to 158°F)

Output Specification

Sink up to 24mA, Source up to 15mA

PC Bracket

Standard Height

# of Ports

48

Power Requirement

+5V @ 1A

Storage Temperature

-50 – +105C

  • • 48 channels of buffered TTL I/O
  • • Each 8-bit port individually configurable as input or output
  • • 8255 mode 0 compatible
  • • 10K pull up resistors on each bit
  • • +5V power and ground provided on connector
  • • Two industry standard 50-pin solid-state relay rack connectors
  • • SeaIO Classic software supports Microsoft Windows operating systems
  • • Software support for Linux available

Manual

Manual: 8005

Reviews

There are no reviews yet.

Be the first to review “PIO-48.PCI”

Your email address will not be published. Required fields are marked *

Accessories