Part#: 8010

Print Friendly, PDF & Email

PIO-32.PCI

(1 customer review)
Part#: 8010 Categories: ,

PCI 32 Channel TTL Digital Interface

Call for price

Description

THIS PRODUCT IS OBSOLETE DUE TO LACK OF COMPONENT AVAILABILITY. PLEASE CONTACT YOUR SALES REPRESENTATIVE FOR FURTHER INFORMATION AND NEW PRODUCT ALTERNATIVES.

Sealevel will support legacy products through technical and warranty support, software drivers and product manuals. Please contact Sales for further information.

The 8010 PCI digital I/O interface provides 32 channels of buffered drive digital I/O, which can be utilized for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. 10K pull-up resistors are included. Optional values are available.

The 8010 digital I/O interface board contains 4 groups of eight-bit I/O ports, configurable as inputs or outputs to suit the automation task.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Additional information

Board Connector

50-Pin Header

Digital I/O

TTL I/O

Extended Temperature

Call for Options

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)

PCI

Number of Inputs/Outputs

32 (TTL)

Operating Temperature

0°C to 70°C (32°F to 158°F)

Output Specification

Sink up to 24mA, Source up to 15mA

PC Bracket

Standard Height

# of Ports

32

Power Requirement

+5V @ 1A

RoHS Compliant

Yes

Storage Temperature

-50 – +105C

  • • Compliant with RoHS and WEEE directives
  • • 32 channels of buffered TTL I/O
  • • Each 8-bit port individually configurable as input or output
  • • 10K pull up resistors on each bit
  • • +5V power and ground provided on connector
  • • Industry standard 50-pin solid-state relay rack connector
  • • SeaIO Classic software supports Microsoft Windows operating systems
  • • Software support for Linux available

Manual

Manual: 8010

1 review for PIO-32.PCI

  1. Andy

    Good Product / Great Support
    I used the Sealevel 8010 to replace an older ISA I/O card in an industrial computer as part of a system upgrade which includes moving from Windows XP to Windows 7. The new card worked as expected, which was a drop-in replacement on the hardware side. The software was also easy to implement, using example code provided by Sealevel. The provided driver worked without any problem and even includes a variety of configuration options. On top of that, Sealevel provided support above and beyond expectations, helping me to choose the best I/O board to suite my needs.

Add a review

Your email address will not be published. Required fields are marked *

Accessories