Will RS-530 serial devices work with Sealevel RS-422 or RS-485 serial interfaces?

 

Yes. An RS-530 to RS-422/485 interface cable will be required to match up the signal pin outs of the interfaces. Use the CA176 cable to connect the DB25 connector of an RS-530 device to the DB9 connector of a Sealevel RS-422/485 serial port.

Resources

Recent FAQs

  • What network speeds can SeaI/O Ethernet (SeaI/O-E) modules handle?
  • What are the advantages of using an advanced UART?
  • SeaMAC: ssiEncodingNone vs ssiEncodingNrz
  • How can the RJ-45 connections on RS-232 and RS-485 SeaI/O data acquisition devices be used?
  • Is the 7203e PCIe serial interface dip switch or software configurable to change the RS-485 termination from a 120 Ohm resistor to an AC termination?

    • Subscribe to our e-Newsletter

    Subscribe