SeaRAQ 8 Channel-to-Channel Isolated A/D Inputs

Part: 6510   Model: SeaRAQ-6510

$749.00

Need some help? Contact us

Description

SeaRAQ™ I/O expansion modules provide unprecedented expansion capabilities for the Sealevel Relio R3 and Relio R4 industrial computers. The 6510 provides eight general purpose 16-bit A/D channels that can be individually configured for 4-20 mA current loop, 0-5V or 0-10V voltage inputs. For maximum protection from damaging external voltages commonly found in industrial environments, the SeaRAQ 6510 expansion board includes 1500 VAC of channel-to-channel and field-to-logic isolation.

The current loop receiver inputs are ideal for interfacing a wide variety of industrial process control and test equipment that use 4-20 mA signaling. The 4-20 mA standard remains a popular method for signal transmission in harsh environments, even over long distances. Current loop has a low sensitivity to electrical noise and is not affected by signal loss over cable runs or interconnections. For easy, reliable field wiring, the board uses removable, high-retention terminal block connectors.

Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Communicate using industry-standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Additional information

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

A/D Inputs

8 Analog Inputs

A/D Resolution

16-bits

Analog I/O

A/D Inputs

Family

SeaRAQ

Dimensions

PCB is 6.00" (L) x 4.35" (W)

Extended Temperature

Call for Options

Field Wiring

16 – 30 AWG

A/D Range

0-20 mA, 4-20 mA, 0-5V, 0-10V

Input Isolation

1500 VAC RMS (Channel-to-Channel and Field-to-Logic)

Input Impedance

250 Ohms

Modbus

Modbus RTU

Operating Temperature

0°C to 70°C (32°F to 158°F)

Plate Connectors

High-Retention, Removable Terminal Blocks

RoHS Compliant

Yes

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

  • General purpose A/D expansion module with eight (8) 16-bit, single-ended inputs
  • 1500 VAC field-to-logic and channel-to-channel isolation
  • Each input can be individually configured for 4-20 mA, 0-5V or 0-10V
  • 18-32 VDC user loop voltage range in 4-20 mA current mode
  • Industry standard Modbus RTU interface
  • Input power provided via backplane connector
  • Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
  • Includes 20-position, removable, high-retention Phoenix terminal blocks
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Reviews

There are no reviews yet.

Be the first to review “SeaRAQ-6510”

Your email address will not be published. Required fields are marked *