Part#: 8012


Part#: 8012 Categories: ,

Low Profile PCI 8 Reed Relay Output / 8 Isolated Input Digital Interface (3-13V)



The 8012 Low Profile PCI digital interface provides eight Reed relay outputs (SPST) and eight optically isolated inputs. Reed relays are well suited for low current applications. The relays are normally open, and close when energized. The board is MD1 Low Profile and Universal Bus (3.3V and 5V) compatible.

The 8012 is for use in Low Profile PCI slots only. Order the 8012S if you have a standard size PCI slot. The inputs on the 8012 are rated for 3-13V. For 10-30V inputs, order the 8012H.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Additional information

Weight 1.5000 lbs
Dimensions 4.70 x 2.50 x 1.00 in
Board Connector

Contact Current

Contact Voltage

Digital I/O


Extended Temperature

Humidity Range

Input Range

Input Impedance

Host Interface(s)

Number of Inputs/Outputs

Operating Temperature

PC Bracket

# of Ports

Power Requirement

RoHS Compliant

Storage Temperature

  • • Compliant with RoHS and WEEE directives
  • • Eight Reed relay outputs (SPST)
  • • Eight optically isolated inputs
  • • Highly reliable 10VA DIP Reed relays
  • • Socketed DIP resistor allows user configurable input range up to 24 VDC
  • • MD1 Low Profile and Universal Bus (3.3V and 5V) compatible
  • • Power (+5V and +12V) and ground provided on connector
  • • SeaIO Classic software supports Microsoft Windows operating systems
  • • Software support for Linux available

1 review for DIO-16.LPCI

  1. Rated 5 out of 5


    Using 8012 for over 7 years
    Have used the 8012 in our commercial applications for over 7 years now and performs consistently

Add a review

Your email address will not be published. Required fields are marked *