SeaI/O-410E Ethernet Modbus TCP to 16 Isolated Inputs / 16 Reed Relay Outputs
SeaI/O-410E Ethernet Modbus TCP to 16 Isolated Inputs / 16 Reed Relay Outputs

Part# 410E

(SeaI/O-410E)

Ethernet Modbus TCP to 16 Isolated Inputs / 16 Reed Relay Outputs


OR

Request a Quote | Where to Buy | Email Sales
Monitor and control 16 optically isolated inputs and 16 Reed relay outputs via any Ethernet connection with the SeaI/O-410E. Inputs can range from 5-30VDC, while the Reed relays provide long-life switch closures well suited to low-current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-410E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Host Interface Ethernet
# of Ports 16/16
Brand/Family SeaI/O
Digital I/O Isolated Inputs, Reed Relay Outputs
RoHS Yes
Number of Inputs/Outputs 16 Inputs / 16 Outputs
Input Isolation 300V
Input Range 5-30 VDC
Contact Voltage 60VDC max.
Contact Current 500mA max.
Contact Operate Time 0.5ms max.
Contact Bounce Time 0.5ms max.
Contact Release Time 0.2ms max.
Power Requirement 9-30 VDC @ 2.9W
Operating Temperature 0 - +70C
Extended Temperature Call for Options
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions 7.5 (L) x 5.1 (W) x 1.3 (H)
  • • 10/100BaseT Ethernet Modbus TCP interface
  • • 16 SPST Form A Reed relays
  • • 16 optically isolated inputs
  • • Removable screw terminals simplify field wiring
  • • Status indicator LEDs for Communication, Fault, and Power
  • • Input power via terminal block or modular connector
  • • DIN rail or table mount
  • • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems









DAQFactory Express
Part#SW-DAQF-EXP
DAQFactory Express

Call For Price

CAT5 UTP 7' Patch Cable
Part#CA246
CAT5 UTP 7' Patch Cable

$8.95

CAT5 UTP 10' Patch Cable
Part#CA247
CAT5 UTP 10' Patch Cable

$9.95

Ethernet Crossover Cable
Part#CA251
Ethernet Crossover Cable

$8.95

SeaI/O RS-485 Interconnect
Part#CA239
SeaI/O RS-485 Interconnect

$2.95

Spring Clamp Terminal Block Kit
Part#TB-SP9-KT
Spring Clamp Terminal Block Kit

$29.95

SeaI/O Expansion
Part#KT122
SeaI/O Expansion

$8.95

Flush Mount Bracket
Part#KT123
Flush Mount Bracket

$17.95

Universal Mounting Bracket
Part#KT125
Universal Mounting Bracket

$69.95

 
Proudly Made in the USA
© Copyright 1996 - 2015, Sealevel Systems, Inc. All rights reserved.