The 4030 ISA digital I/O interface is designed around two 8255 chips, each providing 24 I/O lines. The board has a Dip-switch for flexible I/O addressing, IRQ jumpers for interrupts and two sets of connectors for each port. A standard 50-pin solid state relay I/O module connector and a 40-pin connector with power and IRQ signals is provided. The 50-pin connects (through an optional cable) to industry standard PB-8, -16 or -24 solid state relay I/O modules. The 40-pin connector, terminated in an optional DB-37 cable, matches the pin-out of Generic PIO-12 boards.
Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Note: This item has a minimum order quantity (MOQ) of 25 units. Please contact your sales representative with any questions.