My Cart
The SeaI/O-463E Ethernet to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. A metal strain relief bracket is included to secure the cables after installation. The SeaI/O-463E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
Communicate with the SeaI/O-463E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.
Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463 orders.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
Communicate with the SeaI/O-463E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.
Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463 orders.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
| Host Interface | Ethernet |
|---|---|
| # of Ports | 96 |
| Brand/Family | SeaI/O |
| Digital I/O | TTL I/O |
| RoHS | Yes |
| Number of Inputs/Outputs | 96 TTL |
| Output Specification | Sink up to 64mA Source up to 32mA |
| Output Power | +5V @ 1A (5W) max. |
| Power Requirement | 9-30 VDC @ 2.0W |
| Operating Temperature | 0 - +70C |
| Extended Temperature | Call for Options |
| Storage Temperature | -50 - +105C |
| Humidity Range | 10 - 90% Relative Humidity, Non-Condensing |
| Dimensions | 7.5 (L) x 5.1 (W) x 1.3 (H) |
- • 10/100BaseT Ethernet Modbus TCP interface
- • 96 channels of buffered TTL I/O
- • Each 8-bit port individually configurable as input or output
- • Four 50-pin industry standard solid-state relay rack connectors
- • Status indicator LEDs for Communication, Fault, and Power
- • Input power via terminal block or modular connector
- • DIN rail or table mount
- • Sealevel SeaMAX software supports Microsoft Windows operating systems
 Part#463M SeaI/O-463M
$269.00
|
 Part#463S SeaI/O-463S
$289.00
|
 Part#463U SeaI/O-463U
$269.00
|
 Part#463W SeaI/O-463W
$549.00
|
