Search Now
HUB4PH-OEM Embedded High Speed 4-Port USB 2.0 Hub with Battery Charging Downstream Ports
HUB4PH-OEM Embedded High Speed 4-Port USB 2.0 Hub with Battery Charging Downstream Ports

Part# HUB4PH-OEM

(4-Port USB 2.0 Hub OEM)

Embedded High Speed 4-Port USB 2.0 Hub with Battery Charging Downstream Ports



OR

Don't see what you need? Ask about a custom product.

Where to Buy | Email Sales |
Or call us at: 864.843.4343
For industrial computing applications that require embedded USB ports, the HUB4PH-OEM with four USB battery charging downstream ports is the ideal solution. The hub is USB 2.0 compliant, providing a full 480M bps data rate to the host, and is backwards compatible with USB 1.1 and 1.0 devices. The HUB4PH-OEM includes a +5V power cable that sources power from a standard hard drive connector. Order the appropriate internal USB cable for your motherboard under the Accessories tab.

As USB charging has gained popularity, the 500mA minimum found on other USB 2.0 hubs has become insufficient for devices requiring higher charging rates. The ports on the HUB4PH-OEM are configured as a Charging Downstream Ports (CDP) capable of supplying up to 1.5A of current to each downstream device. All downstream ports are USB Battery Charging Specification BC1.2 Compliant, perfect for charging batteries or powering high-current USB peripherals.

Supported in Windows, Linux, and other USB aware operating systems, the HUB4PH-OEM requires no separate drivers. A 2mm 5-pin Molex vertical header provides an internal USB connection to your host system. For EBX and larger motherboards with a 0.1 onboard USB header, order the CA469 internal USB cable. For smaller motherboards with a 2mm onboard USB header, order the CA472 internal USB cable. Standard operating temperature range is 0C to +70C and extended temperature range (-40C to +85C) is optional.

The HUB4PH-OEM is perfect for adding up to four iPorthole Digital I/O modules to your embedded application. The optional CA471 internal USB cable provides the connection from the 5-pin downstream USB ports on the HUB4PH-OEM to the 4-pin USB connector on iPorthole modules.

The intelligent Porthole design is perfect for expanding industrial computing platforms using only an internal USB connection. iPorthole modules include an intelligent USB I/O board with Sealevel's innovative Porthole mounting plate for installation in a Relio or custom enclosure. Simply design the 3.2" x 3.1" Porthole mounting footprint into your enclosure to mix and match iPorthole USB I/O modules for maximum configurability. The Porthole footprint offers a standardized method for interfacing real-world I/O connections. The HUB4PH-OEM allows you to connect up to four iPorthole modules using only a single USB connection on the motherboard.
Host Interface(s) USB
# of Ports 4
RoHS Compliant Yes
Power Requirement 5VDC @ 4A
Operating Temperature 0 - +70C
Storage Temperature -50 - +105C
Humidity Range 10 - 90% Relative Humidity, Non-Condensing
Dimensions 2.9 (L) x 2.5 (W) x 0.8 (H)
Communications Chip USB Hub
USB Specification USB 2.0 Compliant; Compatible with USB 1.1 and 1.0 devices
Max Data Rate 480M bps
Max Data Distance 5 meters
  • • Powered USB 2.0 hub provides four USB CDP ports
  • • Four Charging Downstream Ports (CDP) supply up to 1.5A to each connected device
  • • All CDP are battery charging specification BC1.2 compliant
  • • Status LED indicates internal connection to the host
  • • USB (Universal Serial Bus) 2.0 compliant hub
  • • Backwards compatible with USB 1.1 and USB 1.0 devices
  • • Supports high-speed 480M bps, full-speed 12M bps and low-speed 1.5M bps operation
  • • Supported in Windows, Linux and other USB aware operating systems
  • • Includes +5V internal power cable (Item# CA393)
  • • Uses Molex 5-pin vertical 2mm locking header for USB connection (Mating connector Molex# 35507-0500)


Internal USB Device Cable
Part#CA469
Internal USB Device Cable

$8.95

USB Device Cable
Part#CA470
USB Device Cable

$11.95

Internal USB Device Cable
Part#CA471
Internal USB Device Cable

$8.95

Internal USB Device Cable
Part#CA472
Internal USB Device Cable

$10.95

PC/104 Adapter
Part#PH104
PC/104 Adapter

$15.00

SeaLATCH USB Panel Mount Adapter
Part#SL-PM
SeaLATCH USB Panel Mount Adapter

$9.95

SeaLATCH USB Low Profile PCI Adapter
Part#SL-LPCI
SeaLATCH USB Low Profile PCI Adapter

$19.95

SeaLATCH USB PCI Adapter
Part#SL-PCI
SeaLATCH USB PCI Adapter

$19.95

SeaLATCH Dual USB PCI Adapter
Part#SL-PCI2
SeaLATCH Dual USB PCI Adapter

$29.95

SeaDAC Lite DIO-8 Kit
Part#8111-KT
SeaDAC Lite DIO-8 Kit

$149.00

SeaDAC Lite PLC-8 Kit
Part#8112-KT
SeaDAC Lite PLC-8 Kit

$159.00

SeaDAC Lite ISO-4 Kit
Part#8113-KT
SeaDAC Lite ISO-4 Kit

$99.00

SeaDAC Lite REL-4 Kit
Part#8114-KT
SeaDAC Lite REL-4 Kit

$119.00

SeaDAC Lite REL-4C Kit
Part#8115-KT
SeaDAC Lite REL-4C Kit

$129.00

SeaDAC Lite PIO-32 Kit
Part#8126-KT
SeaDAC Lite PIO-32 Kit

$119.00

SeaLINK+232.PC
Part#2108
SeaLINK+232.PC

$69.00

SeaLINK+232.PC
Part#2108S
SeaLINK+232.PC

$69.00

SeaLINK/PC.SC
Part#2128
SeaLINK/PC.SC

$129.00

SeaLINK+2/232.PC
Part#2208
SeaLINK+2/232.PC

$129.00

SeaLINK+2/PC.SC
Part#2228
SeaLINK+2/PC.SC

$179.00

Proudly Made in the USA
© Copyright 1996 - 2017, Sealevel Systems, Inc. All rights reserved.