Wi-Fi 802.11b/g Modbus TCP to 96 Channel TTL Digital Interface

Part: 463W   Model: SeaI/O-463W

$313.00

  • Complies with 802.11g and 802.11b (2.4GHz) networking standards
  • Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
  • 96 channels of buffered TTL I/O
  • Each 8-bit port individually configurable as input or output
  • Four 50-pin industry-standard solid-state relay rack connectors

Need some help? Contact us

Description

The SeaI/O-463W wireless to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry-standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. A metal strain relief bracket is included to secure the cables after installation. The SeaI/O-463W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-463W over Wi-Fi (802.11b and 802.11g) networks using industry-standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463 orders.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Categories: , ,

Additional information

Family

SeaI/O

Output Power

14dBm +1.5/-1.0 dBm

Wireless Data Rates

54Mbps Max.1Mbps Min.

Wireless Range

328' (Indoors)

Wireless Channels

11 (US)13 (Europe, Japan)

Storage Temperature

-50°C to 105°C (-58°F to 221°F)

Power Requirement

9-30 VDC @ 2.0W

# of Ports

96

Output Specification

Sink up to 64mA, Source up to 32mA

Operating Temperature

0°C to 70°C (32°F to 158°F)

Digital I/O

TTL I/O

Number of Inputs/Outputs

96 TTL

Host Interface(s)

Wi-Fi (802.11bgn)

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Frequency Range

2.412 – 2.484 GHz

Extended Temperature

Call for Options

Dimensions

7.5 (L) x 5.1 (W) x 1.3 (H)

Wireless Standards

802.11b802.11g802.11i

  • Complies with 802.11g and 802.11b (2.4GHz) networking standards
  • Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
  • 96 channels of buffered TTL I/O
  • Each 8-bit port individually configurable as input or output
  • Four 50-pin industry-standard solid-state relay rack connectors
  • Status indicator LEDs for Communication, Fault, and Power
  • Input power via terminal block or modular connector
  • DIN rail or table mount
  • Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

Windows Software

Software: SeaMAX - Windows

Linux Software

Software: SeaMAX - Linux

Datasheet

Datasheet: 463W

Reviews

There are no reviews yet.

Be the first to review “SeaI/O-463W”

Your email address will not be published. Required fields are marked *

Accessories