Part#: 8018S

Print Friendly, PDF & Email


Part#: 8018S Categories: ,

PCI 24 Channel TTL Digital Interface



The 8018S Low Profile PCI digital I/O interface provides 24 channels of buffered drive digital I/O emulating 8255 mode zero. The board can be utilized for PC-based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. 10K pull-up resistors are included and optional values are available.

The 8018S contains three groups of eight-bit I/O ports. Each group is individually configurable as input or output to suit the automation task. The board is Universal Bus (3.3V and 5V) compatible and ships with a ribbon cable terminating in an industry-standard 50-pin IDC connector.

The 8018S is for use in standard size PCI slots only. If you have a Low Profile PCI slot, order the 8018.

Sealevel’s SeaIO Classic software drivers and utilities make installation and operation easy using Windows and Linux operating systems.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

Additional information

Board Connector

50-Pin Header

Digital I/O


Extended Temperature

Call for Options

Humidity Range

10 – 90% Relative Humidity, Non-Condensing

Host Interface(s)


Number of Inputs/Outputs

24 (TTL)

Operating Temperature

0°C to 70°C (32°F to 158°F)

Output Specification

Sink up to 24mA, Source up to 15mA

PC Bracket

Standard Height

# of Ports


Power Requirement

+5V @ 1A

RoHS Compliant


Storage Temperature

-50 – +105C

  • • Compliant with RoHS and WEEE directives
  • • 24 channels of buffered TTL I/O
  • • Each 8-bit port individually configurable as input or output
  • • 8255 mode 0 compatible
    • 10K pull up resistors on each bit
  • • +5V power and ground provided on connector
  • • MD1 Low Profile and Universal Bus (3.3V and 5V) compatible
  • • Includes a 40 inch ribbon cable with (2) 26-pin IDC connectors to an industry-standard 50-pin IDC connector (Item# CA315)
  • • SeaIO Classic software supports Microsoft Windows operating systems
  • • Software support for Linux available


There are no reviews yet.

Be the first to review “PIO-24.LPCI”

Your email address will not be published. Required fields are marked *